Skip to content

bombcheck/esp8266_milight_hub

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

esp8266_milight_hub GitHub release

Fork of sidoh's great work to fix some things and hopefully pushing the boundaries of MiLights possibilities. The following text is his original README (just replaced some links for consistency):

This is a replacement for a Milight/LimitlessLED remote/gateway hosted on an ESP8266. Leverages Henryk Plötz's awesome reverse-engineering work.

Milight bulbs are cheap smart bulbs that are controllable with an undocumented 2.4 GHz protocol. In order to control them, you either need a remote ($13), which allows you to control them directly, or a WiFi gateway ($30), which allows you to control them with a mobile app or a UDP protocol.

This project is a replacement for the wifi gateway.

This guide on my blog details setting one of these up.

Why this is useful

  1. Both the remote and the WiFi gateway are limited to four groups. This means if you want to control more than four groups of bulbs, you need another remote or another gateway. This project allows you to control 262,144 groups (4*2^16, the limit imposed by the protocol).
  2. This project exposes a nice REST API to control your bulbs.
  3. You can secure the ESP8266 with a username/password, which is more than you can say for the Milight gateway! (The 2.4 GHz protocol is still totally insecure, so this doesn't accomplish much :).
  4. Official hubs connect to remote servers to enable WAN access, and this behavior is not disableable.
  5. This project is capable of passively listening for Milight packets sent from other devices (like remotes). It can publish data from intercepted packets to MQTT. This could, for example, allow the use of Milight remotes while keeping your home automation platform's state in sync. See the MQTT section for more detail.

Supported remotes

The following remotes can be emulated:

Support has been added for the following bulb types:

Model # Name Compatible Bulbs
FUT096 RGB/W
  1. FUT014
  2. FUT016
  3. FUT103
FUT005
FUT006
FUT007
CCT
  1. FUT011
  2. FUT017
  3. FUT019
FUT098 RGB Most RGB LED Strip Controlers
FUT020 RGB Some other RGB LED strip controllers
FUT092 RGB/CCT
  1. FUT012
  2. FUT013
  3. FUT014
  4. FUT015
  5. FUT103
  6. FUT104
  7. FUT105
  8. Many RGB/CCT LED Strip Controllers
FUT091 CCT v2 Most newer dual white bulbs and controllers
FUT089 8-zone RGB/CCT Most newer rgb + dual white bulbs and controllers

Other remotes or bulbs, but have not been tested.

What you'll need

  1. An ESP8266. I used a NodeMCU.
  2. A NRF24L01+ module (~$3 on ebay). Alternatively, you can use a LT8900.
  3. Some way to connect the two (7 female/female dupont cables is probably easiest).

Installing

Connect the NRF24L01+ / LT8900

This project is compatible with both NRF24L01 and LT8900 radios. LT8900 is the same model used in the official MiLight devices. NRF24s are a very common 2.4 GHz radio device, but require software emulation of the LT8900's packet structure. As such, the LT8900 is more performant.

Both modules are SPI devices and should be connected to the standard SPI pins on the ESP8266.

NRF24L01+

This guide details how to connect an NRF24 to an ESP8266. By default GPIO 4 for CE and GPIO 15 for CSN are used, but these can be configured late in the Web GUI under Settings -> Setup.

NodeMCU Radio Color
GND GND Black
3V3 VCC Red
D2 (GPIO4) CE Orange
D8 (GPIO15) CSN/CS Yellow
D5 (GPIO14) SCK Green
D7 (GPIO13) MOSI Blue
D6 (GPIO12) MISO Violet

Image source: MySensors.org

LT8900

Connect SPI pins (CE, SCK, MOSI, MISO) to appropriate SPI pins on the ESP8266. With default settings, connect RST to GPIO 0, PKT to GPIO 16, CE to GPIO 4, and CSN to GPIO 15. Make sure to properly configure these if using non-default pinouts.

Setting up the ESP

The goal here is to flash your ESP with the firmware. It's really easy to do this with PlatformIO:

export ESP_BOARD=nodemcuv2
platformio run -e $ESP_BOARD --target upload

Of course make sure to substitute nodemcuv2 with the board that you're using.

You can find pre-compiled firmware images on the releases.

Configure WiFi

This project uses WiFiManager to avoid the need to hardcode AP credentials in the firmware.

When the ESP powers on, you should be able to see a network named "ESPXXXXX", with XXXXX being an identifier for your ESP. Connect to this AP and a window should pop up prompting you to enter WiFi credentials. If your board has a built-in LED (or you wire up an LED), it will flash to indicate the status.

The network password is "milightHub".

Get IP Address

Both mDNS and SSDP are supported.

  • OS X - you should be able to navigate to http://milight-hub.local.
  • Windows - you should see a device called "ESP8266 MiLight Gateway" show up in your network explorer.
  • Linux users can install avahi (sudo apt-get install avahi-daemon on Ubuntu), and should then be able to navigate to http://milight-hub.local.

Use it!

The HTTP endpoints (shown below) will be fully functional at this point. You should also be able to navigate to http://<ip_of_esp>, or http://milight-hub.local if your client supports mDNS. The UI should look like this:

Web UI

If it does not work as expected see Troubleshooting.

Pair Bulbs

If you need to pair some bulbs, how to do this is described in the wiki.

Device Aliases

You can configure aliases or labels for a given (Device Type, Device ID, Group ID) tuple. For example, you might want to call the RGB+CCT remote with the ID 0x1111 and the Group ID 1 to be called living_room. Aliases are useful in a couple of different ways:

  • In the UI: the aliases dropdown shows all previously set aliases. When one is selected, the corresponding Device ID, Device Type, and Group ID are selected. This allows you to not need to memorize the ID parameters for each lighting device if you're controlling them through the UI.
  • In the REST API: standard CRUD verbs (GET, PUT, and DELETE) allow you to interact with aliases via the /gateways/:device_alias route.
  • MQTT: you can configure topics to listen for commands and publish updates/state using aliases rather than IDs.

REST API

The REST API is specified using

openapi.yaml contains the raw spec, created using OpenAPI v3.

You can view generated documentation for the master branch here.

Docs for other branches can be found here

MQTT

To configure your ESP to integrate with MQTT, fill out the following settings:

  1. mqtt_server- IP or hostname should work. Specify a port with standard syntax (e.g., "mymqttbroker.com:1884").
  2. mqtt_topic_pattern - you can control arbitrary configurations of device ID, device type, and group ID with this. A good default choice is something like milight/:device_id/:device_type/:group_id. More detail is provided below.
  3. (optionally) mqtt_username
  4. (optionally) mqtt_password

More detail on mqtt_topic_pattern

mqtt_topic_pattern leverages single-level wildcards (documented here). For example, specifying milight/:device_id/:device_type/:group_id will cause the ESP to subscribe to the topic milight/+/+/+. It will then interpret the second, third, and fourth tokens in topics it receives messages on as :device_id, :device_type, and :group_id, respectively. The following tokens are available:

  1. :device_id - Device ID. Can be hexadecimal (e.g. 0x1234) or decimal (e.g. 4660).
  2. :device_type - Remote type. rgbw, fut089, etc.
  3. :group_id - Group. 0-4 for most remotes. The "All" group is group 0.
  4. :device_alias - Alias for the given device. Note that if an alias is not configured, a default token __unnamed_group will be substituted instead.

Messages should be JSON objects using exactly the same schema that the REST gateway uses for the /gateways/:device_id/:device_type/:group_id endpoint. Documented above in the Bulb commands section.

Example:

If mqtt_topic_pattern is set to milight/:device_id/:device_type/:group_id, you could send the following message to it (the below example uses a ruby MQTT client):

irb(main):001:0> require 'mqtt'
irb(main):002:0> client = MQTT::Client.new('10.133.8.11',1883)
irb(main):003:0> client.connect
irb(main):004:0> client.publish('milight/0x118D/rgb_cct/1', '{"status":"ON","color":{"r":255,"g":200,"b":255},"brightness":100}')

This will instruct the ESP to send messages to RGB+CCT bulbs with device ID 0x118D in group 1 to turn on, set color to RGB(255,200,255), and brightness to 100.

Updates

ESPMH is capable of providing two types of updates:

  1. Delta: as packets are received, they are translated into the corresponding command (e.g., "set brightness to 50"). The translated command is sent as an update.
  2. State: When an update is received, the corresponding command is applied to known group state, and the whole state for the group is transmitted.
Delta updates

To publish data from intercepted packets to an MQTT topic, configure MQTT server settings, and set the mqtt_update_topic_pattern to something of your choice. As with mqtt_topic_pattern, the tokens :device_id, :device_type, and :group_id will be substituted with the values from the relevant packet. :device_id will always be substituted with the hexadecimal value of the ID. You can also use :hex_device_id, or :dec_device_id if you prefer decimal.

The published message is a JSON blob containing the state that was changed.

As an example, if mqtt_update_topic_pattern is set to milight/updates/:hex_device_id/:device_type/:group_id, and the group 1 on button of a Milight remote is pressed, the following update will be dispatched:

irb(main):005:0> client.subscribe('milight/updates/+/+/+')
=> 27
irb(main):006:0> puts client.get.inspect
["lights/updates/0x1C8E/rgb_cct/1", "{\"status\":\"on\"}"]
Full state updates

For this mode, mqtt_state_topic_pattern should be set to something like milight/states/:hex_device_id/:device_type/:group_id. As an example:

irb(main):005:0> client.subscribe('milight/states/+/+/+')
=> 27
irb(main):006:0> puts client.get.inspect
["lights/states/0x1C8E/rgb_cct/1", "{\"state\":\"ON\",\"brightness\":255,\"color_temp\":370,\"bulb_mode\":\"white\"}"]
irb(main):007:0> puts client.get.inspect
["lights/states/0x1C8E/rgb_cct/1", "{\"state\":\"ON\",\"brightness\":100,\"color_temp\":370,\"bulb_mode\":\"white\"}"]

Make sure that mqtt_topic_pattern, mqtt_state_topic_pattern, and matt_update_topic_pattern are all different! If they are they same you can put your ESP in a loop where its own updates trigger an infinite command loop.

Customize fields

You can select which fields should be included in state updates by configuring the group_state_fields parameter. Available fields should be mostly self explanatory, but are all documented in the REST API spec under GroupStateField.

Client Status

To receive updates when the MQTT client connects or disconnects from the broker, confugre the mqtt_client_status_topic parameter. A message of the following form will be published:

{"status":"disconnected_unclean","firmware":"milight-hub","version":"1.9.0-rc3","ip_address":"192.168.1.111","reset_reason":"External System"}

If you wish to have the simple messages connected and disconnected instead of the above environmental data, configure simple_mqtt_client_status to true (or set Client Status Message Mode to "Simple" in the Web UI).

UDP Gateways

You can add an arbitrary number of UDP gateways through the REST API or through the web UI. Each gateway server listens on a port and responds to the standard set of commands supported by the Milight protocol. This should allow you to use one of these with standard Milight integrations (SmartThings, Home Assistant, OpenHAB, etc.).

You can select between versions 5 and 6 of the UDP protocol (documented here). Version 6 has support for the newer RGB+CCT bulbs and also includes response packets, which can theoretically improve reliability. Version 5 has much smaller packets and is probably lower latency.

Transitions

Transitions between two given states are supported. Depending on how transition commands are being issued, the duration and smoothness of the transition are both configurable. There are a few ways to use transitions:

RESTful /transitions routes

These routes are fully documented in the REST API documentation.

transition field when issuing commands

When you issue a command to a bulb either via REST or MQTT, you can include a transition field. The value of this field specifies the duration of the transition, in seconds (non-integer values are supported).

For example, the command:

{"brightness":255,"transition":60}

will transition from whatever the current brightness is to brightness=255 over 60 seconds.

Notes on transitions

  • espMH's transitions should work seamlessly with HomeAssistant's transition functionality.
  • You can issue commands specifying transitions between many fields at once. For example:
    {"brightness":255,"kelvin":0,"transition":10.5}
    will transition from current values for brightness and kelvin to the specified values -- 255 and 0 respectively -- over 10.5 seconds.
  • Color transitions are supported. Under the hood, this is treated as a transition between current values for r, g, and b to the r, g, b values for the specified color. Because milight uses hue-sat colors, this might not behave exactly as you'd expect for all colors.
  • You can transition to a given status or state. For example,
    {"status":"ON","transition":10}
    will turn the bulb on, immediately set the brightness to 0, and then transition to brightness=255 over 10 seconds. If you specify a brightness value, the transition will stop there instead of 255.

LED Status

Some ESP boards have a built-in LED, on pin #2. This LED will flash to indicate the current status of the hub:

  • Wifi not configured: Fast flash (on/off once per second). See Configure Wifi to configure the hub.
  • Wifi connected and ready: Occasional blips of light (a flicker of light every 1.5 seconds).
  • Packets sending/receiving: Rapid blips of light for brief periods (three rapid flashes).
  • Wifi failed to configure: Solid light.

In the setup UI, you can turn on "enable_solid_led" to change the LED behavior to:

  • Wifi connected and ready: Solid LED light
  • Wifi failed to configure: Light off

Note that you must restart the hub to affect the change in "enable_solid_led".

You can configure the LED pin from the web console. Note that pin means the GPIO number, not the D number ... for example, D2 is actually GPIO4 and therefore its pin 4. If you specify the pin as a negative number, it will invert the LED signal (the built-in LED on pin 2 is inverted, so the default is -2).

If you want to wire up your own LED on a pin, such as on D2/GPIO4, put a wire from D2 to one side of a 220 ohm resister. On the other side, connect it to the positive side (the longer wire) of a 3.3V LED. Then connect the negative side of the LED (the shorter wire) to ground. If you use a different voltage LED, or a high current LED, you will need to add a driver circuit.

Development

This project is developed and built using PlatformIO.

Running tests

On-board unit tests are available using PlatformIO. Run unit tests with this command:

pio test -e d1_mini

substituting d1_mini for the environment of your choice.

Running integration tests

A remote integration test suite built using rspec is available under ./test/remote.

Acknowledgements

  • @WoodsterDK added support for LT8900 radios.
  • @cmidgley contributed many substantial features to the 1.7 release.

Donating

If the project brings you happiness or utility, it's more than enough for me to hear those words.

If you're feeling especially generous, and are open to a charitable donation, that'd make me very happy. Here are some whose mission I support (in no particular order):

Packages

No packages published

Languages

  • C++ 70.1%
  • Ruby 16.8%
  • JavaScript 7.3%
  • HTML 4.0%
  • CSS 0.7%
  • Shell 0.5%
  • Other 0.6%